Global B2B supply for writing, drafting, classroom, and creative programs. Request procurement support

Office Supply FAQ: Pentel Pens, Highlighters, Binders, and Digital Whiteboards

Gabriela Nunes Staedtler procurement notes

I'm the office administrator for a 150-person company. I manage all supply ordering—roughly $60K annually across six vendors—and I report to both operations and finance. When I took over purchasing in 2021, I fielded the same handful of questions every quarter, from new hires and managers and whoever inherited the supply closet when someone left. So I started keeping a list. Here are the ones that come up most, answered the way I'd answer them if you stopped me in the hallway.

1. What do I need to know before buying a Pentel calligraphy pen for the office?

First, a clarification that saves people a lot of confusion: "calligraphy pen" covers a wide range. You've got disposable brush pens, refillable cartridge pens, and fountain-pen-style models with interchangeable nibs. Pentel is probably best known in this space for its brush pens—the kind with a flexible felt or synthetic tip that gives you thick-to-thin line variation without a metal nib. They're forgiving, they don't require ink bottles, and they don't leak in a drawer.

Whether you actually need them depends on the job. If somebody in marketing wants to hand-letter a sign for a trade show, a brush pen is fine and cheap. If you're producing something that needs archival ink and consistent line weight, you're looking at a different tool entirely.

My buying advice: honestly, test one before you order a dozen. Ask the person requesting it what they're writing on. Brush pens behave very differently on coated cardstock versus plain copy paper—the ink can bead up or bleed. And check whether the model is refillable. A disposable pen at $4 is fine; a dozen disposables that dry out in a month is basically money in the trash.

I'm not a calligrapher, so I can't tell you which nib flex is "correct" for a copperplate style. What I can tell you from a procurement perspective is to match the tool to the actual job and buy small first.

2. Are Pentel clutch pencils worth it for a shared office?

"Clutch pencil" is one of those terms that means different things to different people. In most office contexts, people mean a mechanical pencil—a refillable body that holds replaceable lead. "Clutch" specifically refers to the mechanism that grips the lead, and Pentel's drafting-style pencils (the GraphGear line, for instance) are built around that idea.

Here's the honest trade-off. Mechanical pencils are great because you never sharpen them and the lead is consistent. But they're also small, shiny, and easy to walk off with. In a shared space, expensive drafting pencils disappear at a rate that will surprise you. I've watched a $15 pencil vanish from a communal desk in under a week.

My approach: buy decent mid-range mechanical pencils for general use—0.5 mm and 0.7 mm lead sizes cover almost everything—and keep the nicer ones behind a request form. To be fair, the cheap ones break and jam more, so you're not saving as much as the sticker price suggests. But the math on losing a $20 pencil every month is worse.

One practical note: standardize your lead size. If half the office uses 0.5 and half uses 0.7, you'll stock two refill types and someone will always grab the wrong one. This worked for us, but we're a company with predictable, steady usage. If you've got a design team that's particular about their tools, the calculus might be different.

3. How do I choose highlighters that won't smear?

The short answer: buy a small sample of a few types, test them on the paper you actually print on, and let that decide it. Highlighter performance is a three-way interaction between ink chemistry, paper coating, and how fast the underlying text was printed.

Most highlighters fall into two families—water-based and wax- or gel-based. Water-based ones dry fast and work well on plain paper but can smear certain inkjet prints. Wax-based ones sit on top of the page and are less likely to lift toner, but they can feel waxy and skip on smooth paper. Gel highlighters are a newer middle ground and tend to be gentle on printed text.

Color matters more than people expect. For actual highlighting, stick to yellow, pink, and light green. Darker colors—purple, blue, orange—look nice in a pack but obscure the text you're trying to mark. If your team color-codes documents, pick two or three high-contrast colors and standardize on them, or you'll end up with a drawer full of half-used pens and no system.

One thing I wish I'd done earlier: create a labeled test sheet with a few lines of the office's standard printout and run every new highlighter across it before approving a bulk order. Takes five minutes and saves a ton of complaints.

4. What size 3 ring binder do we actually need?

Binder capacity is usually quoted in ring diameter, but what matters is sheet capacity. A rough guide: a 1-inch ring holds about 175–200 sheets of standard 20 lb bond paper, a 2-inch holds roughly 400–475, and a 3-inch holds around 570–700. Those numbers assume you're not stuffing it.

People overfill binders constantly, and that's where the damage happens—rings misalign, pages tear at the holes, and the cover splits. If you know a project runs to 350 sheets, don't buy a 1.5-inch binder and hope. Buy the next size up.

Also worth knowing: D-ring binders hold more sheets for the same ring size and lay flatter on a shelf, which matters if you're storing them. And if you're using sheet protectors, add roughly 10 percent to your space estimate—each protector takes up more room than a loose sheet.

Paper standards are worth a quick sanity check too. Standard US letter paper is 8.5 × 11 inches, and the everyday copy paper everyone buys is 20 lb bond, which converts to about 75 gsm. Heavier paper (24 lb, roughly 90 gsm) is nicer for documents that get handled a lot but eats binder capacity faster.

We didn't have a formal check for binder sizing when I first took over. Cost us when a department ordered 40 two-inch binders for a project that needed three-inch ones, and we ate the return shipping on all of them. Now there's a one-line question on the order form: "How many sheets?"

5. What is a digital whiteboard, and do we actually need one?

The term gets used for two different things, which causes a lot of confused meetings.

The first is hardware: a large interactive display you mount on a wall or roll into a room. You write on it with a stylus or your finger, and it saves and shares what you wrote. Some models also act as a video-conferencing screen.

The second is software: an app like Miro, FigJam, or Microsoft Whiteboard that gives you an infinite canvas you can share with remote participants in real time.

Which one you need depends on how your team actually works. If most of your meetings are in person and you just want to stop photographing a dry-erase board with your phone, a software whiteboard on a tablet might be enough. If you run hybrid meetings where half the room is remote and you need them to see and annotate the same canvas, hardware or a shared software license starts to make sense.

I'm not an AV or IT specialist, so I can't speak to panel specs or integration quirks—that's a conversation for your IT team. What I can tell you from a purchasing perspective is that the hardware is a real capital expense plus installation plus a support contract, and the software is usually a per-seat subscription. Get both numbers before you commit.

Our situation: we went with a software subscription for distributed teams and kept the physical whiteboards for in-room work. That worked for us because we were already hybrid. If your company is fully in-office, the calculus might be different—you may get more value from better dry-erase boards and a good camera than from an interactive display.

6. Is the cheapest option actually cheaper?

It's tempting to think you can just compare unit prices and pick the lowest. But identical specs from different vendors can produce wildly different outcomes once you factor in delivery reliability, invoicing, and returns.

I learned this the hard way in 2021. I found a new vendor offering pens and paper significantly cheaper than our regular supplier, ordered several cases, and then discovered they couldn't produce a proper invoice—just a handwritten receipt. Finance rejected the expense report and I had to absorb the cost out of the department budget. Now I verify invoicing and return policy before I place any first order, no matter how good the price looks.

To be fair, budgets are real, and sometimes the cheapest option is genuinely the right call—especially for low-stakes consumables where a slight quality dip doesn't matter. But the "always get three quotes" advice ignores the transaction cost of vetting vendors and the value of a relationship where someone picks up the phone when a shipment goes missing. Granted, that relationship has to earn its keep. But it's worth something.

7. What's your one piece of advice for someone taking over supply ordering?

Build a vendor list with notes on what each one is actually good at, and write down the invoicing and return terms for each. That document will save your successor hours. The second thing: don't chase the lowest price on everything. Chase the lowest total cost of ownership, which includes your time.

An informed buyer asks better questions and makes faster decisions. That's the whole game. I'd rather spend ten minutes explaining to a colleague why we're not buying the $1 binder than deal with a torn-up project file three months from now.

Ask about this topic